Angler’s loop

Written by

in

Angler’s loop
Angler's loop
Names Angler’s loop, Perfection loop
Category Loop
Releasing Jamming
Typical use Fishing, forming a fixed loop in bungee cord
ABoK #1017, #1035, #2067
Instructions

An angler’s loop, otherwise known as a perfection loop, is a type of knot which forms a fixed loop. Useful for fine or slippery line, it is one of the few loop knots which holds well in bungee cord. It is quite secure, but it jams badly and is not suitable if the knot will need to be untied. [1]

Tying

Angler’s loop may be tied

  • alone and then used,
    • it may be tied in the bight or at the working end
    • it may be tied one handed
    • it may be fashioned with several loops
    • it may be locked for additional stability
    • it may be tied at high speed in an emergency
  • it may be tied through an object (typically a ring).
Angler's loop
Untightened angler’s loop
Angler's loop
Method of tying the angler’s loop through an object
  • Start with a loop near the working end
    Start with a loop near the working end
  • Continue with two loops around standing end
    Continue with two loops around standing end
  • one large and one small in the middle
    one large and one small in the middle
  • Pull the large loop over the small (working end) and through the first loop
    Pull the large loop over the small (working end) and through the first loop
  • Tighten pulling in all three directions.
    Tighten pulling in all three directions.

Angler’s loop may be tied around the hand, it may also be tied this way one handed, or with several loops if need be:

  • Hold the working end, loop the standing end 3 times around the palm
    Hold the working end, loop the standing end 3 times around the palm
  • Pull the outmost loop inwards under the first two
    Pull the outmost loop inwards under the first two
  • Pull the next outmost over the one(s) in the middle and under the now innermost loop
    Pull the next outmost over the one(s) in the middle and under the now innermost loop
  • Pull the now innermost loop(s) and the standing end to tighten.
    Pull the now innermost loop(s) and the standing end to tighten.
  • Done.
    Done.
  • Angler’s loop may be locked additionally with half hitches
Angler's loop
Locked simple loop A half hitch around the loops root locks it
  • Angler’s loop may be fashioned with several loops (then locking may be necessary)
Angler's loop
with several loops and locked first the loops in desired size, last loop is for the knot and may be smaller. half hitches around the loops roots locks them.
  • A version with an additional locking turn of the tail called Double Dragon is shown in this video:

youtube.com/watch?v=gWhLCM3Hm7U

Structure

Overhand knot on standing part and half-hitch by the working end.

See also

References

  1. “Anglers loop or Perfection loop”. Knots and Climbing. 2025. Retrieved 13 May 2025.{{cite web}}: CS1 maint: deprecated archival service (link)
  • Budworth, Geoffrey (2012). The Knot Book Hachette UK. ISBN 9780716023159.
  • Toss, Brion and Gae Pilon (2009). Chapman Knots for Boaters, pages 68–68, Sterling Publishing Company. ISBN 9781588167781.

External links


This article is adapted from “Angler's loop” on Wikipedia, written by its contributors, and used under CC BY-SA 4.0. Text on this page is available under the same licence. Source snapshot: Wikipedia via Kiwix, 2026-07-20.